Both Gush paints, in stock

Buy Gush Anti-Mould Paint in Singapore

Gush Care from S$31 and Gush Clean Care from S$34, in 1L, 5L and 20L tins, with DIY application support and free delivery over S$100.

Included with every paint order

DIY application support from people who use these paints

Ask about surface preparation, primer, coat count, coverage or the right paint for your room. Send a wall photo before ordering or while you work; the advice is included without an installation bundle.

Ask about DIY application · Read the application guide

Quick answer

Pico X Health sells both Gush anti-mould interior paints in Singapore: Gush Care from S$31 for 1L and Gush Clean Care from S$34 for 1L, each in the full Gush colour range and in 1L, 5L and 20L tins. Gush Care is the anti-mould wall paint; Gush Clean Care adds an air-purifying function for bedrooms and enclosed rooms. Delivery is free on orders over S$100, with a flat S$15 fee below that.

Gush Care or Gush Clean Care?

What it costs

TinGush CareGush Clean Care
1L — one feature wallS$31S$34
5L — a whole roomS$101S$116
20L — a whole flatS$339S$361

Free delivery on orders over S$100; orders under S$100 pay a flat S$15 delivery fee. See shipping & delivery and returns.

How we use Gush on real jobs

Gush Care is designed as a topcoat over a Gush MouldSeal primer, applied once the surface is clean, dry and free of live mould. The anti-mould additive is blended into the top coat as a standard step.

That order matters more than the brand. Paint is the last 10% of the job. Skip the treatment and the primer and any topcoat — Gush, Zinsser or otherwise — will be stained again within a monsoon season.

  • Treat the mould and correct the moisture source first
  • Prime with Gush MouldSeal on the affected surface
  • Top-coat with Gush Care or Gush Clean Care, to full even coverage
  • Anti-mould additive blended into the top coat as standard

Common questions

How much does Gush paint cost in Singapore?

Gush Care starts at S$31 for 1L, S$101 for 5L and S$339 for 20L. Gush Clean Care starts at S$34 for 1L, S$116 for 5L and S$361 for 20L. Prices are the same across every colour in the range. Delivery is free over S$100 and a flat S$15 below that.

What is the difference between Gush Care and Gush Clean Care?

Both are anti-mould interior wall paints on the same base. Clean Care adds an air-purifying function that works on the room air, and costs a few dollars more per tin. For a bathroom or service yard, Care is enough. For a bedroom, nursery or study, Clean Care is the version we recommend.

Is Gush paint good for HDB bathrooms?

Yes, as the topcoat — but only after the mould is treated and the moisture source corrected. On our own jobs the sequence is treat, prime with Gush MouldSeal, then top-coat with Gush Care. Painting straight over live mould traps it and it grows back through within months.

Is Gush safe around babies and pets?

Gush paints are low-odour and low-VOC, which is why we specify them for nurseries and bedrooms. Ventilate while painting and until the coat is touch-dry, as with any wall paint.

How much wall does a tin cover?

Roughly 10 to 12 sqm per coat for 1L and 50 to 60 sqm per coat for 5L on a prepared surface. Over a previously mouldy wall, plan for full, even coverage (usually two coats) — a standard HDB bedroom wall usually takes one 5L tin.

Gush or Zinsser Perma-White?

Gush is far cheaper per tin and lower in odour, which makes it the right buy for bedrooms, nurseries and dry walls. Zinsser Perma-White is the tougher scrubbable eggshell for bathrooms, kitchens and service yards at S$109 for a 3.78L gallon. Our comparison page sets both out side by side.