Gush Care Interior Paint
Anti-mould interior wall paint used in our Signature Care service. Free delivery on orders over S$100.
From S$31.00 – up to S$339.00
In stock Free delivery over S$100
Quick answer
Gush Care Interior Paint is an anti-mould interior wall paint sold in Singapore from S$31 for 1L, with 5L and 20L tins available. One litre covers roughly 10 sqm per coat, and two coats over a clean, dry, treated surface is the standard specification.
About Gush Care Interior Paint
Gush Care is the anti-mould interior paint we specify on Signature Care mould remediation jobs in Singapore. It resists mould and mildew growth on painted surfaces in the 75-85% relative humidity our climate delivers year round, and holds up in bedrooms, living rooms, kitchens and corridors where condensation and poor airflow normally let mould re-establish within months of a repaint. Choose your colour and tin size below; every order ships free anywhere in Singapore.
- Resists mould and mildew on the painted film
- Formulated for Singapore humidity of 75-85% RH
- Low odour, low VOC - safe for occupied homes
- Full Gush colour range with real hex swatches
- Same paint we use on Signature Care remediation jobs
- Free delivery on orders over S$100
Colours and sizes
221 colours available in 1L, 5L, 20L. Free delivery on orders over S$100; S$15 delivery fee on orders under S$100.
Specifications
| Type | Anti-mould interior wall paint |
| Sizes | 1L / 5L / 20L |
| Finish | Matt |
| Coverage | ~10 sqm per litre per coat |
| Coats | 2 coats recommended |
| Delivery | Free, Singapore-wide |
How to use it
Wash down the wall and remove all loose or flaking material. Treat any existing mould with an antimicrobial wash and let the surface dry completely. Seal, then apply two coats of Gush Care, allowing at least two hours between coats.
Frequently asked questions
Does Gush Care stop mould coming back?
It resists mould growing on the paint film itself, which stops the visible black speckling returning on the wall surface. It is not a substitute for fixing the moisture source - treat and dry the substrate first, then paint.
How much paint do I need?
Allow about 10 sqm per litre per coat. A standard HDB bedroom wall of 12 sqm needs roughly 2.5L for two coats, so a 5L tin is the usual choice.
Do I need a primer or sealer first?
On a previously mould-affected wall, yes. Treat with an antimicrobial wash, let it dry fully, then apply a sealer before two coats of Gush Care.
How long between coats?
Two hours in typical Singapore conditions. Allow longer in an unventilated bathroom or on a rainy day.
Is delivery really free?
Free delivery on orders over S$100. Orders under S$100 pay a flat S$15 delivery fee.
Need it applied for you?
We also remove mould and repaint. See Mould Removal & Painting, or read the anti-mould paint guide.