Shield22 Pro Anti-Condensation Coating
Stop Ceiling, Wall & Aircon Condensation in Singapore
When a ceiling, wall or aircon ledge is colder than the room's dew point, tropical humidity condenses on it — dripping water, wet walls, mouldy vents, stained ceilings. Shield22 Pro is a thermal micro-ceramic coating that raises the surface temperature above dew point so nothing condenses in the first place. From S$18/m². 5-year warranty.
Where condensation is costing you
- Ceiling drips onto your bed — cold slab above, humid air below
- Wall behind the bedhead is wet — neighbour's aircon chills your shared wall
- Aircon grille drips onto the floor — grille surface below dew point
- Aircon ledge and bulkhead sweat — concrete bridged to the cold coil
- Shopfront or F&B ceiling drips on customers — cold-air handling chills plenum
- Cold water pipes stain ceilings below — uninsulated pipes sweat in bulkheads
How Shield22 Pro works
Shield22 Pro is a water-based thermal micro-ceramic coating applied at 400–600 microns to any cold surface. It dramatically reduces heat transfer between the cold structure and the warm humid room air. The exposed surface stays 3–6°C warmer — enough to keep it above dew point in typical Singapore conditions. No condensation forms, so nothing drips, and mould has nothing to grow on.
- Applied over paint, plaster, concrete, or metal
- Non-toxic, low-VOC — safe for occupied rooms
- Works with existing aircon — no rewiring
- 5-year condensation-free warranty
Pricing (all "From")
- Shield22 Pro coating: From S$18/m²
- HDB bathroom ceiling: From S$450
- Aircon ledge / bulkhead: From S$380
- Cold water pipe insulation + coating: From S$120 per run
- Whole-unit HDB anti-condensation package: From S$1,800
- Commercial cold-room / F&B ceiling: From S$28/m²
- Site inspection + thermal reading: S$50 on-site (deductible if you engage us)
Pick your condensation problem
- Ceiling Condensation & Dripping — HDB & condo bedroom ceilings
- Aircon Ledge & Bulkhead Sweating
- Neighbour's Aircon Making Your Wall Wet
- Window & Glass Condensation
- Cold Water Pipe Sweating
- Coating vs Insulation vs Dehumidifier
- Commercial Grille Condensation (Retail / F&B / Clinics)
- Mouldy Aircon Grille & Vent
Representative case study — Bugis F&B tenant, 220 m² cold-storage ceiling
Problem: Ceiling above the walk-in chiller weeping onto prep surfaces. Ceiling surface at 14°C; kitchen air at 26°C / 78% RH. Dew point 8°C above ceiling temperature. Water pooling daily.
Solution: Shield22 Pro applied at 500 microns over 220 m² of chiller-adjacent ceiling. Two coats, cured overnight. Zero business disruption (11pm–5am application).
Result: Ceiling surface temperature raised from 14°C to 21°C. Dripping stopped within 24 hours. 12-month follow-up: dry, mould-free, no re-coating needed.
Representative composite based on typical Pico X Health commercial cold-storage jobs. Documented cases available under NDA — WhatsApp us for your sector.
Anti-Condensation FAQs
- What causes ceiling and wall condensation in Singapore homes?
- Singapore's outdoor humidity averages 80–90%. When any surface is cooler than the room's dew point (typically 20–22°C in an aircon room), water vapour condenses on it. Cold ceilings under a neighbour's aircon, aircon ledges, and cold-water pipes are all commonly below dew point.
- How does Shield22 Pro stop condensation?
- Applied at 400–600 microns, it dramatically reduces heat transfer from the cold structure to warm humid room air. The exposed surface stays 3–6°C warmer — enough to keep it above dew point.
- How is this different from insulation or a dehumidifier?
- Insulation requires ceiling demolition and reduces headroom. Dehumidifiers run 24/7 with ongoing electricity cost. Shield22 Pro is applied to the offending surface only, no demolition, no ongoing cost. See the coating-vs-insulation-vs-dehumidifier comparison.
- Will it work if the water is dripping because of my neighbour's aircon?
- Yes — Shield22 Pro on your side of the shared wall or ceiling raises your surface above dew point, even if the structure behind it stays cold. You don't need the neighbour to change habits.
- How long does it last?
- 5 years condensation-free warranty. Coatings typically maintain thermal properties 8–10 years indoors. Any spot that loses effect in the warranty period is retreated free.
- Is it safe for kids, pregnant women, elderly, pets?
- Yes. Water-based, low-VOC, cures within 4 hours. Contains no biocides, isocyanates, or formaldehyde. Room occupiable same day.
Our Team in Action
Trained Pico X Health technicians follow strict containment, PPE, and protocols on every job in Singapore.
Before & After: Real Singapore Jobs
Documented mould remediation across HDB, condo, landed and commercial spaces.
Products We Use & Recommend
Professional-grade equipment and coatings selected for Singapore's humid climate.
Shield23 Pro — Antimicrobial Coating
Long-life inorganic-ion defense applied by trained Pico X Health technicians across hospitals, F&B, schools, and homes.
Recommended Services
Pico X Health services most relevant to this topic.
Watch: Something happens at home whenever it rains
Damp that only shows up after rain has a specific cause.
Recognising rain-driven damp: wet patches after heavy rain usually point to condensation or water ingress rather than surface dirt. Watch on YouTube · More Pico X Health videos